Shingle, Tile & Metal Roofing in Palm Springs - Free Roof Inspection, Written Price

Fast, Reliable Shingle, Tile & Metal Roofing Across Palm Springs

Roofing in Palm Springs comes down to one hard truth: the concrete block homes here were built to a different standard, and they age differently than anything you’ll find in West Palm Beach or Royal Palm Beach. When you need shingle, tile, or metal roofing replaced or repaired on a 1950s-1970s CBS ranch, the work has to account for low roof pitches, salt-laden humidity, and the way old flashing corrodes into the block. Winslow Windows & Doors has been doing exactly that since 2011, with Ed Winslow’s name on every job. Call (561) 928-0302 for a free roofing estimate in Palm Springs.

Call (561) 928-0302

Why Winslow Windows & Doors Is Palm Springs’s Preferred Shingle, Tile & Metal Roofing Company

We’re not a franchise. We’re not a call center that dispatches a subcontractor you’ve never met. We’re a locally owned, owner-operated company, and Ed Winslow is the person accountable for the work. Palm Springs homeowners call us because a real person answers the phone at 2 a.m., not a voicemail loop. That matters when a roof leak opens up during a summer storm off Congress Avenue or a rusted edge metal finally gives way on a home near Davis Road.

Our Shingle, Tile & Metal Roofing crews work throughout Palm Springs, from the older blocks off 10th Avenue North to the neighborhoods around Lakewood Drive. We know the housing stock here. We know the permitting process in Palm Beach County. And we know that when you’re replacing a roof on a 1960s CBS ranch, the roof-to-wall transitions are where the failures happen, not the roofing material itself. That’s the kind of local knowledge you only get from working these streets for over a decade.

Every technician who comes to your door in Palm Springs is background-checked and arrives in uniform. You’ll know who’s on your property before the truck pulls up. But the bigger promise is our Done Right Promise. If it’s not done right, we make it right. No fine print, no expiration, no ticket number. Ed’s word, backed by a published address and license number.

Our Shingle, Tile & Metal Roofing Services in Palm Springs

We don’t do “a little of everything.” We do exterior protection, and we do it in the specific ways Palm Springs homes actually need. Here’s what that looks like.

Shingle Roofing

Most Palm Springs homes were built with low-pitch roofs, which changes how shingles perform. A low slope sheds water slower, so underlayment and ice-and-water shield placement matter far more than they would on a steeper West Palm Beach roof. We replace shingle roofs with materials matched to the pitch and wind zone, and we reflash every penetration rather than reusing corroded aluminum from the 1970s. On a CBS home near Greenbrier Drive, that alone prevents the roof leaks that patch jobs never fix.

Tile Roofing

Concrete and clay tile roofs are heavy, and Palm Springs block homes were built to carry that load, but the original underlayment under those tiles is often shot. We see it constantly: the tile looks fine, the roof is leaking. Replacing tile in Palm Springs means stripping to deck, inspecting the sheathing and block ties, and resetting tile with new underlayment and flashings. It’s labor-intensive work, but it’s the only way to get a tile roof that lasts another 40 years in Palm Beach County humidity.

Metal Roofing

Metal roofing is picking up here for one simple reason: it handles the heat and the humidity. A standing-seam metal roof on a Palm Springs ranch reflects more sun than shingle, and it won’t corrode like the pre-1980 edge metal that fails on so many local homes. We install metal roofs with the right underlayment and fastening patterns for Palm Beach County’s wind-borne debris zone. Done correctly, a metal roof on one of these block homes is the closest thing to a permanent roof you can buy.

Roof Repairs

Not every Palm Springs roof needs full replacement. When a leak shows up after a storm, we find the actual source, not the stain on the ceiling. That means walking the roof, checking the flashings, and pulling the damaged section to see what’s underneath. We quote repairs honestly. If a $400 flashing repair fixes it, that’s what we recommend. The $40 off any repair over $200 is our standing offer, and it never expires.

Trusted Brands We Service in Palm Springs

We install and service roofing and exterior systems from eight authorized brands, including PGT, CGI, and Therma-Tru. For Palm Springs customers, that means we stock common parts and flashings locally, so a repair doesn’t stall waiting on a shipment from a distribution center in another state. Whether it’s a PGT impact-rated unit custom-sized for a jalousie rough opening or a metal roof transition tied into a Door Installation - Palm Springs project, we service what we install, and we do it fast.

Common Shingle, Tile & Metal Roofing Problems We See in Palm Springs Homes

• Corroded roof-to-wall flashing on 1950s-70s CBS homes. The original aluminum edge metal and flashing on Palm Springs ranches corrode from salt-laden humidity. When we pull a rotted frame or replace a window, the adjacent roof flashing has to be reflashed to the same standard, or the wind mitigation inspection fails.
• Leaks from old jalousie frame removal loosening the block. When a jalousie bank gets demoed, the surrounding concrete block often has hairline cracks. Those cracks wick water into the roof deck long before anyone notices a stain on the ceiling. We grout and waterproof the opening before setting new units, then flash the transition so the roof edge ties in clean.
• Undersized rough openings that force custom units. Palm Springs homes weren’t built for modern impact glazing. A standard slider won’t seat in a 1950s rough opening without shimming, and improper shimming cracks the frame under design pressure. We custom-order narrower impact units for those openings. It’s not a convenience; it’s the only way to pass inspection.
• Flat or low-pitch roof ponding. The low roof pitches common in Palm Springs mean water doesn’t evacuate as quickly. When a low-pitch shingle or modified bitumen roof starts ponding, the underlayment degrades fast. We address drainage as part of any re-roof, because new shingles over a ponding problem is just a prettier version of the same leak.

Pricing for Shingle, Tile & Metal Roofing in Palm Springs, FL

What Shingle, Tile & Metal Roofing Costs in Palm Springs

If you’re comparing costs, the framing question is always the same: what are we working with underneath? On a Palm Springs block home, the roof deck, the flashing, and the condition of the original edge metal drive the quote more than the shingle or tile you pick. A simple shingle overlay, where we can reuse the deck, starts around $8,000 for a 1,200-square-foot ranch. A full tear-off with new underlayment, new flashings, and new edge metal pushes $12,000-$15,000. Tile is heavier and slower: $15,000-$30,000 is the honest range for a Palm Springs ranch. Metal is $18,000-$40,000 for standing seam, with the high end reflecting custom trim work and any structural repairs up top. We don’t bid low to win and then change-order you later. The price is fixed in writing before we order, and we honor it. Free in-home measure and written quote, always.

Florida Pays You Back

The incentives for upgrading a Palm Springs home are real, and they stack. My Safe Florida Home matching grants cover up to $10,000 in qualifying wind-mitigation upgrades for eligible homeowners. Florida’s sales-tax exemption on impact-resistant windows and doors takes the tax off the materials. The federal 25C energy credit covers 30% of product cost, up to $600 per year, on qualifying units. And after a wind-mitigation inspection, which runs $75-$150 for most Palm Springs homes, windstorm premiums typically drop by around 25% on the windstorm portion of the policy. We don’t control the program numbers, and your carrier sets the final credit. But we’ll point you to the right paperwork and note what’s claimable on your panel upgrade or re-roof. This isn’t a gimmick; it’s how Florida homeowners are funding storm readiness.

One comparison worth making: impact windows beat hurricane shutters for one reason. Shutters only help when someone is there to hang them. Impact-rated glass protects the home whether you’re home, at work, or evacuated. For snowbirds and working families in Palm Springs, that’s the difference between a protected house and a bet on the forecast.

We Also Serve Cities Near Palm Springs

Beyond Palm Springs, our crews regularly handle roofing and impact work in Mangonia Park, West Palm Beach, South Palm Beach, and Royal Palm Beach. If you’re a few blocks outside the village line, you’re still in our local service area, and the same pricing, the same warranties, and the same live-answer phone apply.

FAQs - Shingle, Tile & Metal Roofing in Palm Springs

Impact-Rated Glazing and the Roof Transition Nobody Else Explains

Here’s the thing about Palm Springs no generic window or roofing page tells you. On most of these CBS ranches, the roof edge and the windows are not separate projects. They share a joint. The original aluminum frames were set into the block, and the roof flashing lapped over them. When we pull a rotted jalousie bank or a corroded slider, we’re also exposing the top of that joint, and if the flashing has been wicking moisture for forty years, we’re going to find rot in the roof deck. That’s not a complication; that’s the job. It’s the reason the Shingle, Tile & Metal Roofing crew and the window crew have to talk to each other on a Palm Springs job. On a 1960s CBS ranch off Congress Avenue, our crew pulled a rusted aluminum jalousie bank in a bathroom and rebuilt the block opening to accept a PGT impact-rated casement with Miami-Dade NOA, grouting the surround and flashing the transition so the new metal roof edge tied in without a leak path. That’s the kind of detail that never appears on a chain’s estimate. It appears on our final invoice as a line item, because it’s the part that keeps the house dry for thirty years.

If you want a roof that holds, windows that hold, and a company that holds to its word, call (561) 928-0302. We’ll walk the property, write you a fixed price, and stand behind it with the Done Right Promise. Ed’s name is on the door, and on every job we do in Palm Springs.

Written by Ed Winslow, Owner at Winslow Windows & Doors, serving Palm Springs since 2011.