Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterPGT Windows & Doors in South Palm Beach, FL | Winslow Windows & Doors
We provide independent PGT window and door service across South Palm Beach, and the one thing that makes our Impact Windows - South Palm Beach work here different is this: this island’s salt air attacks aluminum hardware from two directions at once, and we’ve spent years learning exactly where PGT products fail under that pressure. South Palm Beach condo owners call us when a PGT slider grinds, a WinGuard lock won’t seat, or an association rejects paperwork. Call (561) 928-0302 and you’ll reach a live person who knows PGT products and South Palm Beach buildings.
Why South Palm Beach Residents Choose Us for PGT Service
Winslow Windows & Doors is locally owned by Ed Winslow, who grew up in Mangonia Park and learned construction fundamentals at Palm Beach State College before spending years installing windows and doors across Palm Beach County. We’ve rebuilt and serviced PGT windows and doors in hundreds of South Palm Beach condominium units, so we know exactly how PGT’s aluminum and vinyl lines perform under the island’s duplex salt corrosion and hurricane wind loads, even though we are an independent service provider for our Window Installation in South Palm Beach, not authorized by PGT.
That independence matters. We’re not a manufacturer’s warranty arm. We’re your neighbors, and we make calls based on what actually works in a ninth-floor oceanfront unit, not what a corporate flowchart says. Our PGT sales & service work defaults to OEM parts for glass and structural hardware, but we won’t hesitate to spec marine-grade aftermarket rollers or 316 stainless track screws when they outperform what the factory shipped. Ed’s name is on the door and on every job we do.
Common PGT Windows & Doors Problems We Solve in South Palm Beach
- Chalky, pitted aluminum frames and sill tracks. Salt-laden air attacks PGT’s aluminum frame corners and sill tracks, causing white chalky oxidation and eventual pitting that jams sliding panels within 5 to 7 years on direct ocean exposure. On a barrier island barely a quarter-mile wide, that exposure comes from the Atlantic and the Intracoastal, so we see it faster here than almost anywhere else in the county.
- Sagging sashes on older single-hung impact models. PGT’s older single-hung impact models, pre-2015, develop sagging balances at the 36-inch sash width, causing uneven closing and a compromised seal under high wind. We replace the balance springs, often upgrading to a heavier-duty set that handles South Palm Beach’s design wind corridor better than OEM.
- Grinding, binding horizontal sliders. Roller assemblies on PGT horizontal sliders corrode at the steel axle, causing noisy, binding operation and eventual derailment, especially on balconies facing the Intracoastal. We see this on original 1970s-era balcony doors all over the town’s 8 to 15 story towers.
- Warped French door meeting rails. Interlocking meeting rails on PGT French doors warp under direct west-facing sun, creating air leaks and making the active leaf nearly impossible to latch after enough expansion cycles. West exposure in South Palm Beach means afternoon heat on top of ambient humidity and salt.
- Failed condensation seals and fogged glass. Constant temperature swings between air-conditioned interiors and oceanfront exteriors, combined with wind-driven salt on the outside, cause seal failure and interior fogging. We handle reglazing with OEM-compatible laminated impact glass.
PGT Service in South Palm Beach: What Local Conditions Mean for Your Equipment
Here’s a fact that shapes every PGT repair in South Palm Beach and almost nowhere else: the town’s condo towers from the 1960s through early 1980s are almost universally governed by associations requiring pre-approved color and profile specs for PGT installations. Many boards have banned original jalousie or single-pane slider replacements outright unless the new windows carry a Florida Product Approval number that exactly matches the building’s wind-load calculations. That requirement isn’t enforced on the mainland. In communities like West Palm Beach or Mangonia Park, a homeowner can usually pick the product they like and move forward. In South Palm Beach, the paperwork comes first.
That means a simple roller replacement on a PGT Eze-Breeze in a Lantana-area condo might not need board review, but a full frame replacement in a 1972 tower on South Ocean Boulevard almost certainly will. We build condo-board submittal packets, including elevation drawings and product approval numbers, into every project proposal before we pull a county permit. Skipping that step is how owners end up with a beautiful new PGT WinGuard that the association rejects on week three, and we won’t let that happen to you.
PGT Models & Products We Service in South Palm Beach
We service the full PGT lineup that matters on this island: PGT WinGuard Aluminum Impact, PGT WinGuard Vinyl Impact, the PGT 770/780 Series Aluminum Impact family, and PGT Eze-Breeze Vinyl Sliding panels. For glass, frames, and structural hardware, we default to PGT OEM replacement parts to maintain the original Miami-Dade NOA and Florida Product Approval ratings. But we’ll use marine-grade or upgraded aftermarket rollers, balance springs, and weatherstripping when they outperform OEM in South Palm Beach’s salt-air environment. We stock common PGT rollers, balance springs, and weatherstripping locally for fast turnaround on high-rise jobs.
PGT Service Pricing in South Palm Beach
Most PGT service calls in South Palm Beach run $165 to $350 flat-rate depending on what’s failed: roller assemblies on sliding doors, balance springs on single-hungs, or sealing and weatherstripping work. Glass reglazing on a WinGuard impact unit typically lands between $400 and $900 per sash, while a full frame replacement in a high-rise with condo-board submittal work usually runs $1,800 to $4,500 per opening. What drives cost here more than anywhere else is access, a 9th-floor unit with limited elevator scheduling adds labor, and board paperwork adds time, not materials. We’ll give you a written line-item quote before any work starts because that’s how Ed’s always done it.
If you have a written estimate from another company, bring it by. We’ll give you a free second opinion on it. Call (561) 928-0302 and we’ll walk you through exactly what your building requires and what it’ll cost.
Serving South Palm Beach, FL - Our Local Coverage Area
We’re based in the South Palm Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - PGT Windows & Doors in South Palm Beach
In most cases, yes, we can replace just the laminated impact glass in your PGT WinGuard sash without swapping the whole frame. The exception is when frame corrosion around the glazing channel has compromised the structural seal, at that point patching glass into a failing frame wastes your money. Call (561) 928-0302 and we’ll tell you honestly which side of the line your window falls on, estimates are free.
That grinding is almost always the roller assemblies, the steel axles corrode in salt air and bind against the aluminum housings. Yes, we can replace them without removing the full door panel in most South Palm Beach condo units. We lift the panel off its track, swap the rollers, and rebuild the wool pile weatherstripping if needed. Call (561) 928-0302 if your door is grinding now, because the longer it runs on dead rollers, the more likely the track itself gets scored and needs replacement.
PGT doesn’t make a jalousie-style impact window. South Palm Beach condos replacing original jalousies almost always go to a fixed or single-hung PGT WinGuard impact unit with a narrow sightline, which gives you a similar louvered visual if you spec narrow mullions without sacrificing the Florida Product Approval rating. Your association’s architectural board will need to approve the profile, so we include elevations and product approval numbers in every submittal packet. Call (561) 928-0302 and we’ll pull the specifics for your building.
PGT impact windows in direct oceanfront exposure typically last 15 to 25 years for the glass and frame, but hardware, rollers, weatherstripping, balance springs, and lock components, usually needs attention at the 5 to 7 year mark because of the duplex salt corrosion on this island. Well-maintained units with scheduled hardware swaps can outlast the 25-year mark. Call (561) 928-0302 if your PGT windows are hitting the five-year point and we’ll inspect the hardware before small problems become big glass jobs.
Yes. This happens often in South Palm Beach, where boards require a Florida Product Approval number matching their wind-load calculations, and a mainland installer may not have submitted the right documents. We’ll audit your installation, pull the correct product approval numbers for your PGT model, and build the compliance packet your association needs. If the installation itself fails the board’s wind-load criteria, we’ll tell you straight and quote the replacement. Call (561) 928-0302, we’ve untangled plenty of these.
Service Areas Near South Palm Beach
Winslow Windows & Doors serves South Palm Beach service area plus the communities around it, including PGT service in Mangonia Park, PGT service in West Palm Beach, Palm Beach, Riviera Beach, and Royal Palm Beach. If your building is in one of these towns and you need PGT work, the same crew and the same standards apply.
Book Your PGT Service in South Palm Beach Today
My name is on the business. That means your windows are my responsibility long after we’ve packed up the truck. Call (561) 928-0302 for a free estimate on PGT service in South Palm Beach. A real person answers, and we’ll get your windows working right.
Written by Ed Winslow, Owner at Winslow Windows & Doors, serving South Palm Beach since 2011. The one down the road.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.