PGT Shingle, Tile & Metal Roofing Nationwide | Winslow Windows & Doors

PGT Shingle, Tile & Metal Roofing in Mangonia Park: What to Know First

We provide independent PGT shingle, tile, and metal roofing service in Mangonia Park, typically completing most roof repairs within one to three days of the estimate. Our pricing is straightforward: you’ll get a written line-item quote before any work begins, and the number on that quote is the number you pay. No change orders, no end-of-job surprises.

Call (561) 928-0302

This page is for homeowners in Mangonia Park who have a PGT roof system, or a PGT roof component like a skylight, roof window, or integrated gutter system, and need someone who actually knows how those products behave in South Florida. If you’re weighing a repair versus a full replacement, or just want a second opinion on a quote you’ve already received, call (561) 928-0302 and Ed Winslow or one of our techs will give you a straight answer.

Key Takeaways

• We service PGT shingle, tile, and metal roof systems as an independent provider, not a manufacturer-authorized dealer.
• Most roof repairs in Mangonia Park run $350 to $2,800 depending on the roof type and damage extent.
• Our Done Right Promise covers every roof job we do. If it’s not right, we come back.
• You’ll get a written quote before work starts, and a real person answers the phone 24/7.

How PGT Products Fail - and How We Fix Them

PGT is best known around Mangonia Park for impact windows and doors, but plenty of homes here also carry PGT roof components that were installed as part of a full exterior package. We see the same failure patterns over and over. Here’s what actually goes wrong and what we do about it.

• PGT skylight flashing separation on shingle roofs. The aluminum PGT uses on skylight curbs expands and contracts differently than the asphalt shingle around it. After five or six Mangonia Park summers, the flashing pulls away from the curb and water finds its way under the shingles. We see this on the PGT 500 and 700 series skylights most often. The fix is pulling the surrounding shingles, replacing the flashing with a wider profile, and re-sealing with a polyurethane caulk rated for South Florida UV exposure, not the cheaper silicone some installers use.
• Metal roof panel screw backout on PGT standing seam systems. On metal roofs, the neoprene washers under the fasteners degrade in the heat and salt air we get here, especially in the neighborhoods closer to the Intracoastal. When the washers fail, the screws back out a quarter-turn or more, and you get wall-to-wall micro-leaks that show up as ceiling stains nowhere near the actual hole. We re-fasten with stainless or zinc-coated screws and replace every washer, then check the panel alignment so the next storm doesn’t work the seams loose again.
• Tile underlayment rot that has nothing to do with the tile. PGT tile roofs sit on a substrate that only lasts as long as the underlayment beneath it. We regularly pull up tile in Mangonia Park and find the 30-pound felt underneath has dissolved into dust, which means the “leak” the homeowner sees is actually a failure three layers down. The correct repair is a selective tile lift, new synthetic underlayment in the affected area, and re-bedding the tile with the same profile so water still sheds the way PGT designed it to.
• Flashing failures at PGT roof-window junctions. PGT roof windows integrate with the roof deck using a step-flashing system that depends on precise shingle layering. If the original installer ran the step flashing too short or overlapped it wrong, the window leaks at the bottom corners within two or three wet seasons. We’ve fixed enough of these to know the leak is almost never the window unit itself, it’s the flashing work around it. Pulling the window is almost never necessary; re-flashing is.
• Drip edge and gutter junction failures on PGT metal roof transitions. Where a PGT metal roof meets a shingle roof or a tile roof, the transition piece is the weak point. Mangonia Park downpours dump more water on a transition in an hour than a roof in Georgia sees in a week. When that transition flashing corrodes or pulls loose, the leak runs underneath both roof types and shows up far from the source. We replace transition flashing with a heavier-gauge metal than what was often originally installed, and we re-seal every seam.

Our PGT Shingle, Tile & Metal Roofing Process

1. 1
   You call (561) 928-0302. A live person answers, in Mangonia Park, every single time. No call center, no voicemail loop. We schedule a time that works for you, and we show up when we say we will.
2. 2
   We diagnose on-site. We get on the roof, not just a ladder propped against the gutter. For PGT-specific components like skylights or roof windows, we inspect the flashing, the sealant, the underlayment, and the decking before telling you what’s wrong.
3. 3
   We decide on parts together. If the repair needs a replacement component, we tell you whether a PGT-spec part is required to preserve your warranty, or whether a quality aftermarket component will do the same job for less. We never make that decision for our convenience; we make it based on what your roof actually needs.
4. 4
   We do the work without shortcuts. Shingle repairs get new felt where needed. Tile work gets proper underlayment and re-bedding. Metal work gets the right fasteners and seam sealant. Every job meets the same standard we’d use on our own homes.
5. 5
   We test and clean up. We run water where we repaired to confirm the leak is gone, then we sweep, magnet-sweep for nails, and haul everything away. You shouldn’t know we were there except for the fixed roof.
6. 6
   We back it with the Done Right Promise. If the repair isn’t done right, we come back and make it right. That’s not a warranty card in a drawer. That’s Ed Winslow’s word, and Ed’s name is on the door.

What PGT Shingle, Tile & Metal Roofing Costs in Mangonia Park

Here’s what we see across Mangonia Park, and what we quote honestly and in writing before any work starts:

What moves the price: the roof pitch (Mangonia Park has its share of steep-pitch tile roofs where safety harnesses and extra setup slow us down), the extent of hidden damage we find once we lift the surface, and whether your PGT components need OEM replacement parts or can take quality aftermarket equivalents. You’ll get a free estimate before we order a single material. Call (561) 928-0302 to get started.

Why Mangonia Park Homeowners Call Winslow Windows & Doors for PGT Work

We’ve been doing this since 2011, and Ed Winslow grew up in Mangonia Park, not far from the old Town Hall. He still lives close enough to wave at his customers at the hardware store on a Saturday morning. This isn’t a territory for us; it’s home.

Every tech on a PGT roof job is background-checked and in uniform before they walk up your driveway. Every repair gets the full Done Right Promise. And because we’re authorized installers for CGI, CWS, ES Windows, and ECO Window Systems as well as PGT, when a roof leak traces back to something else in your exterior envelope, we can handle that too without bouncing you to another company. One call, one company, one owner who answers for the work.

FAQs

Contact Ed Winslow for Your PGT Roof Service in Mangonia Park

If you have a PGT shingle, tile, or metal roof in Mangonia Park and need a straight answer about what’s wrong and what it costs, call us. My name is on the business. That means your roof is my responsibility long after we’ve packed up the truck.

Call (561) 928-0302 for your free estimate. A live person answers. Always.

Written by Ed Winslow, Owner, Winslow Windows & Doors at Winslow Windows & Doors, serving Mangonia Park and nearby areas.