Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Energy-Efficient Windows Across South Palm Beach
Energy-efficient window replacement in South Palm Beach typically runs $800 to $1,800 per window for impact-rated units, with whole-condo packages landing between $8,000 and $25,000 depending on floor height and glass spec. The two biggest cost drivers here aren’t labor or brand: they’re wind-zone engineering and condo board approval. We’ve handled both for years, so we know what the boards along South Ocean Boulevard and the A1A corridor actually require. Call (561) 928-0302 for a free in-home measure and written quote.
Why Winslow Windows & Doors Is South Palm Beach’s Preferred Energy-Efficient Windows Company
South Palm Beach is a quarter-mile-wide barrier island, and every building on it faces either the Atlantic or the Intracoastal. That means the original 1960s and 1970s aluminum window frames here corrode from both directions at once, which mainland contractors rarely see and often misdiagnose. Our Energy-Efficient Windows team has walked dozens of these towers, from the mid-rises near Lantana Road up to the 15-story condos at the northern tip. We know which boards want Miami-Dade NOA paperwork before you even think about a permit, and we build the submittal packet into the first quote, not as an afterthought.
Ed Winslow founded this company in 2011 and runs it the way a local should: published address, published license number, and a Done Right Promise on every install. If it isn’t done right, we come back. No ticket numbers, no national-chain phone tree. You call, a live person answers, any hour, any day. Our technicians are background-checked and show up in uniform, so the person at your condo door is exactly who we said it would be.
Our Energy-Efficient Windows Services in South Palm Beach
Low-E & Argon Gas Glass
Low-E coatings and argon-filled cavities are where the energy math actually happens for South Palm Beach units. A west-facing condo slider over the Intracoastal takes direct afternoon sun plus reflected glare off the water, and low-E glass cuts that solar heat gain by roughly half compared to the single-pane aluminum sliders still in most 1960s towers. We spec double-pane low-E with argon for virtually every opening on this island because the payoff in cooling load is immediate and measurable.

ENERGY STAR Replacement Windows
ENERGY STAR certified windows for South Palm Beach’s climate zone need more than a sticker. They need impact glazing that passes Palm Beach County’s HVHZ wind-zone requirements, which is a different animal entirely from a mainland ENERGY STAR promo window. We install insulated laminated glass that carries both the energy certification and the Florida Product Approval numbers your condo board will ask for. A jalousie window from 1968 was never ENERGY STAR anything, and replacing it with a certified impact unit changes how the whole room feels by August.

Insulated Laminated Glass
Laminated glass is the quiet workhorse in South Palm Beach high-rises. It blocks UV, cuts sound from the A1A, and holds its structure during impact, which is what your board’s insurance carrier actually cares about. We push insulated laminated glass hard on oceanfront elevations because it solves three problems at once: heat gain, glare, and the salt-haze that etches untreated glass over time. For units above the 8th floor, laminated is not an upgrade; it’s the correct material.

UV-Blocking & Fade Protection
Ocean-facing condos in South Palm Beach get brutal UV exposure year-round, and it fades furniture, flooring, and wall coverings within a few seasons. Windows with UV-blocking coatings reduce that fade damage without making the unit feel like a cave. We pair the coating with the right visible light transmittance for each elevation so your east-facing living room keeps its morning light while your south-facing bedroom stops turning into a tanning bed.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in South Palm Beach
We install and service a focused lineup, and we’re factory-authorized for the brands that hold up on this island: Therma-Tru for entry and impact door systems, ECO Window Systems for high-performance laminated packages for heavy-duty impact sliders. We’re also a South Palm Beach Mr Glass service provider for specialty glass needs. Because we stock gaskets, rollers, and hardware specific to these lines, a South Palm Beach service call doesn’t stall waiting on a regional warehouse. If you have a written estimate from another installer, bring it to us. Second opinions are free, and we’ll match the scope line by line.
Common Energy-Efficient Windows Problems We See in South Palm Beach Homes
- Corroded bottom tracks on sliding glass doors: The original 6-foot aluminum sliders on oceanfront balconies pool salt water at the track, and the rollers seize within a decade. We spec marine-grade stainless hardware and weep-hole covers on every replacement, which most mainland bids leave off entirely.
- Oxidized jalousie window frames: Those 1960s aluminum frames turn to white powder along the sill track, which throws the sash out of alignment and creates air leaks you can feel from across the room. The fix is a full frame replacement, not a crank repair.
- Failed seals on single-pane sliders: When the seal goes, you get condensation between panes and a permanent haze from salt air intrusion. On the Intracoastal side, this happens faster because the humidity rides the waterline right into the frame.
- Hollow-core entry doors with non-marine hinges: The door itself leaks air, and the hinges rust from Intracoastal salt. That compromises the airtight seal every energy-efficient window in the unit depends on. We replace both together when the building allows it.
Pricing for Energy-Efficient Windows in South Palm Beach, FL
Impact-rated energy-efficient windows in South Palm Beach run $800 to $1,500 per opening installed, with single-hung impact units landing around $900 to $1,800 and large custom openings from $2,500 to $5,000. Whole-condo packages cluster between $8,000 and $25,000, and the spread comes down to three things: how many openings you have, what floor you’re on, and whether your board requires Miami-Dade NOA documentation. Higher floors mean higher design pressures, which means heavier glass and stouter frames. Call (561) 928-0302 for an exact written quote, free of charge and good for 90 days.
We Also Serve Cities Near South Palm Beach
While we’re focused on South Palm Beach for this page, our crews also cover Mangonia Park, West Palm Beach, Royal Palm Beach, and Palm Beach on a regular rotation. Each market has its own building department, its own board review patterns, and its own coastal exposure. If you’re in one of those towns, the same Energy-Efficient Windows standards apply, and we know each jurisdiction’s paperwork cold.
What Energy-Efficient Windows Costs in South Palm Beach
Let’s put real numbers on it. A standard impact single-hung in a mid-rise South Palm Beach condo runs $900 to $1,800 installed. Large sliders and fixed picture windows on oceanfront elevations run $2,500 to $5,000. A full one-bedroom unit with five or six openings typically lands between $8,000 and $14,000. Larger three-bedroom units with multiple sliders can push past $20,000. The price moves with opening count, floor height, frame material, and glass spec. Aluminum is less expensive up front; vinyl carries better thermal performance and never corrodes in salt air. We’ll quote both and explain the tradeoffs without pushing one over the other.
The quote you get from us is a fixed, line-item price. No change orders unless you change the scope. We measure every opening, document the wind zone and design pressure for each elevation, and present it in writing before any work starts. Free in-home measure, free written quote, and Ed stands behind every number.
Florida Pays You Back
South Palm Beach homeowners have three real incentives to stack. My Safe Florida Home offers matching grants up to $10,000 for qualifying wind-mitigation upgrades, which impact windows squarely cover. Florida’s sales-tax exemption on impact-resistant windows and doors takes roughly 6-7% off the invoice at the point of sale. And the federal 25C energy credit returns 30% of product cost, up to $600 per year, on qualifying efficient units. Separately, after a wind-mitigation inspection (typically $75 to $150), most carriers apply a premium credit averaging around 25% on the windstorm portion of the policy. We don’t control the programs or your carrier’s final numbers, but we’ll document every install so you can claim what you’re owed.
The Salt-Air Problem That Decides Your Window Spec
South Palm Beach sits on a strip of land so narrow that the Atlantic and the Intracoastal are both within a five-minute walk of anywhere in town, which is why our Roof Repair in South Palm Beach addresses the same salt-air challenges that attack windows. That geometry creates a failure mode you rarely see on the mainland: bidirectional salt-air corrosion. The original 1960s and 1970s aluminum frames on this island oxidize from both elevations at once. Ocean spray hits the east face. Brackish Intracoastal humidity eats the west face. The result is a white, chalky pitting on the sill tracks and frame welds that weakens the extrusion itself, not just the finish.
We specify stainless steel and hot-dip galvanized hardware on every oceanfront and Intracoastal-facing opening in South Palm Beach. Standard zinc-plated hardware, which works fine in West Palm Beach or Royal Palm Beach, pits and seizes within a few seasons here. Marine-grade weep-hole covers go on every slider, because without them, salt-laden water pools in the track and the rollers fail from the bottom up. This detail alone is worth a few hundred dollars per opening, and skipping it means replacing the track within a decade. The cheap spec always costs more here. Always.
The Dual-Approval Timeline No One Warns You About
In most Palm Beach County towns, replacing windows means pulling a permit and scheduling the crew. In South Palm Beach, it means getting your condo board’s architectural review committee to approve the product first, and that board wants documentation most mainland installers don’t carry. Elevation drawings. Florida Product Approval numbers. Miami-Dade NOA for oceanfront elevations. Without those, the county won’t accept the permit application at all.
On a 12th-floor oceanfront condo along South Ocean Boulevard, we replaced a 1970s jalousie window whose aluminum jamb had rotted through from constant salt spray, with a PGT impact-rated casement carrying a Miami-Dade NOA, as part of a South Palm Beach Roof Replacement & Installation project that included full elevation glazing. The condo board required elevation drawings and product approval numbers before even a county permit, so the submittal packet took three weeks. Inland, that same job would have been permitted in a day. The board review is not a formality on this island; it’s the critical path. We build it into every proposal we write for a South Palm Beach building, which means your timeline from signing to installation is real, not a hopeful estimate.
What Impact-Rated Means for Your South Palm Beach Condo
Impact-rated windows in Palm Beach County’s highest wind-speed corridor are not an upgrade you choose. They’re the code requirement. The county’s HVHZ designation means every opening on an oceanfront elevation must carry Florida Product Approval and, on many buildings, a Miami-Dade NOA. Design pressure ratings are matched to the specific opening and exposure, not pulled from a catalog. We’ll never install a window rated above +/-100 DP where the opening calls for +/-60; the frame gets heavier, the glass gets thicker, and the view gets dimmer for no reason. Your board’s engineer will take the same view, and so will the county inspector. We spec to the opening, and we show our math in the proposal.
One comparison that settles the question for most South Palm Beach owners: impact windows versus hurricane shutters. Shutters only work when someone hangs them, and on a 10th-floor balcony, nobody volunteers. Impact windows protect the unit around the clock, drop the windstorm premium immediately, and count toward the same wind-mitigation credit a shutter system would, without the annual storage and hardware headache. For high-rise condos where the board handles shutter deployment inconsistently, permanent impact glazing is the cleaner answer.
Serving South Palm Beach, FL - Our Local Coverage Area
We’re based in the South Palm Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Energy-Efficient Windows in South Palm Beach
Because South Palm Beach condos require dual approval: first the condo board’s architectural review, then Palm Beach County permitting. The board wants Miami-Dade NOA paperwork, elevation drawings, and product approval numbers before the permit is even submitted. We build that submittal packet into our first proposal, which keeps the timeline from stretching further than it has to. Call (561) 928-0302 and we’ll walk you through what your specific building requires.
A Miami-Dade NOA is a Notice of Acceptance, which certifies that a specific window configuration passed the most stringent hurricane testing protocol in the country. For oceanfront South Palm Beach elevations, it’s often the document your board and the county both require before a permit is issued. We install PGT and ECO Window Systems configurations that carry the NOA, and we include the exact approval numbers in every submittal.
You can replace a single jalousie window in most South Palm Beach condos, provided the new unit matches the board’s approved specs and carries the right product approval, or opt for Custom & Geometric Windows - South Palm Beach if your board’s design guidelines allow architectural variations. Some boards require full elevation consistency, but the majority accept a single-opening replacement if the finish and profile match the building’s look. We’ll handle the board submittal either way, so the process moves without you chasing paperwork.
The Intracoastal side delivers a wetter, more brackish corrosion than ocean spray. Ocean salt dries quickly on the glass and frame; Intracoastal humidity keeps the metal damp for hours, which accelerates pitting on hinges, rollers, and sill tracks. We spec marine-grade stainless on both elevations, but on Intracoastal-facing units we also replace weep-hole covers and treat the track bed with a corrosion inhibitor during install. Call (561) 928-0302 if you see white powder forming on your west-facing frames; that’s the early stage of aluminum oxidation, and it won’t stop on its own.
Most South Palm Beach owners see cooling-load reductions of 20 to 35 percent after replacing single-pane jalousie windows and aluminum sliders with low-E insulated impact units, which translates to $300 to $600 per year in electricity savings for a typical two-bedroom unit. Add the windstorm premium credit from a wind-mitigation inspection, which averages around 25 percent on the windstorm portion, and the combined annual benefit often reaches $800 to $1,200. The payback window shifts depending on your floor, elevation, and current energy bill, but the structural protection is immediate.
Get Your South Palm Beach Energy-Efficient Windows Estimate
If you live in South Palm Beach and your windows are original to the building, the salt air has been working on them for decades. We’ll measure every opening, spec the right glass for the elevation, and hand you a written line-item quote with the board submittal included. No trip charge for South Palm Beach measures, no pressure, no vague numbers. (561) 928-0302. Ed’s name is on the door, and on every job we do.
Written by Ed Winslow, Owner at Winslow Windows & Doors, serving South Palm Beach since 2011.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.










Before
After
Before
After
Before
After