Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterGeometric & Shaped Windows in Mangonia Park, FL
Custom & Geometric Windows – circles, octagons, trapezoids, arched tops, and custom polygons – are specialty units that require precise templating, custom fabrication, and installers who know how to seal and flash non-rectangular openings correctly. At Winslow Windows & Doors, we’ve been measuring, ordering, and installing shaped windows for Mangonia Park homeowners since 2011, and Ed Winslow personally oversees every custom project to make sure the fit is exact and the seal holds.
If you’ve been told a shaped window “can’t be replaced in impact glass” or that you’ll have to board it up and frame in a standard unit, get a second opinion before you do anything. We hear that more than we should. Most geometric openings can be matched in impact-rated glass – it just takes the right fabricator and an installer who’s done it before. Our Custom & Geometric Windows in Mangonia Park service covers the full range of non-standard shapes, and this page focuses specifically on geometric and shaped units: what they cost, how we handle them, and what Mangonia Park homeowners should know before calling anyone.
Call us at (561) 928-0302 – a live person answers every call, any hour of the day.
When You Need Geometric & Shaped Windows
- Your original shaped window is cracked, fogged, or broken. Older geometric units – especially the single-pane circle and arch windows common in Mangonia Park homes built in the 1980s and early 1990s – often fail at the seal or suffer impact damage. When the glass goes, you need a custom replacement, not a patch.
- You’re upgrading to impact glass and don’t want to lose the architectural detail. Palm Beach County’s building code requires impact-rated glazing in new and replacement windows. We can match your existing geometric shape in impact-rated glass so you keep the look without sacrificing the protection.
- The frame around your shaped window is rotting or corroding. South Florida’s humidity and salt air are hard on frames, especially on aluminum units that weren’t properly finished. A soft or discolored frame around a circle or arch window is a water intrusion problem waiting to get worse.
- You’re adding a new shaped window to a wall or above a door. Transom arches above entry doors are popular in Mangonia Park neighborhoods like the older blocks off Northwood Road. We template the opening, order the unit, and handle the framing and flashing so the rough opening is done right before the window goes in.
- A previous installer’s shaped window is leaking around the perimeter. Non-rectangular windows have more perimeter angles to seal than standard units. If water is tracking in at the corners of an arch or along the flat edge of a half-round, the original installation likely skipped steps on flashing or sealant.
- You’re renovating and want a shaped window where there wasn’t one before. An octagon window on a stairwell wall or a circle window in a bathroom can change a room completely. We handle the structural opening, permit coordination, and installation as a single project.
Our Geometric & Shaped Windows Process
- On-site templating and measurement. Shaped windows cannot be ordered from stock dimensions. One of our technicians – background-checked, uniformed, and arriving on schedule – comes to your Mangonia Park home and creates a physical or digital template of the exact opening. For arches, we measure the spring points, the rise, and the chord width. For polygons, we capture every angle. This step is the difference between a window that fits and one that doesn’t.
- Upfront pricing before anything is ordered. Once we have the template and know the shape, glass type, and frame material you want, we give you a fixed price in writing before the unit is ordered. No “we’ll know more when it arrives” – you approve the number first. Seniors and veterans receive a permanent 10% discount on all Winslow work, including custom shaped windows.
- Fabrication through an authorized manufacturer. We order through our authorized brand lineup – CWS and ES Windows both produce custom geometric units in impact-rated configurations that meet Palm Beach County’s Miami-Dade Notice of Acceptance requirements. Lead times vary by shape and glass package, and we’ll give you an honest timeline up front.
- Permit coordination. Replacing a window in a different size or shape, or adding a new window opening, requires a permit in Palm Beach County. We pull the permit, schedule the inspection, and handle the paperwork. You don’t have to chase the county building department.
- Installation and flashing. This is where shaped windows can go wrong if the installer rushes. Every angle on a polygon or curve on an arch needs properly lapped flashing tape and compatible sealant before the window is set. We follow the manufacturer’s installation instructions to the letter – both because it’s right and because it protects your warranty.
- Final inspection and cleanup. After installation, we walk you through the window: how to operate it if it opens, where the weep holes are, what the frame warranty covers, and what our Done Right Promise means for your specific job. If anything about the fit, operation, or appearance isn’t right, we come back and fix it – that’s the Promise, and Ed stands behind it personally.
Geometric & Shaped Windows Pricing in Mangonia Park
Geometric and shaped windows cost more than standard rectangular units, and the reason is straightforward: they’re made to order, templated by hand, and take longer to install. Mangonia Park homeowners should budget for custom fabrication on top of standard installation costs. The table below reflects real ranges for common shaped window types in this market – not national averages pulled from a database.
| Window Shape | Approximate Cost Range (supply + installation) |
|---|---|
| Half-round / full-circle (fixed) | $450 – $950 per unit |
| Arch / eyebrow (fixed) | $500 – $1,100 per unit |
| Trapezoid or triangle (fixed) | $480 – $1,050 per unit |
| Octagon or polygon (fixed) | $550 – $1,200 per unit |
| Transom arch above door (fixed, impact-rated) | $600 – $1,350 per unit |
| Custom or irregular shapes | Quoted individually after templating |
What pushes the cost up:
- Impact-rated laminated glass vs. standard single-pane (impact adds cost but is required under Palm Beach County code for replacements)
- Low-E or tinted glass coatings (worth it in Mangonia Park’s sun exposure, which runs hard from April through October)
- Frame material – aluminum is standard; vinyl is available on some shapes but not all geometric profiles
- Size – a 36-inch circle costs more than a 24-inch circle, and the price scales with glass area
- New opening vs. same-size replacement – cutting or enlarging a rough opening adds framing and permit cost
- Access difficulty – second-floor or difficult-to-reach locations take longer and require additional equipment
We don’t charge a trip fee inside Palm Beach County, and estimates are free. If you’ve already got a written estimate from another company, we’ll give you a free second opinion on it – no strings. Call (561) 928-0302 and a real person will pick up and get you scheduled.
Key Takeaways on Cost
- Budget $450 – $1,350 for most common geometric shapes in impact glass
- Irregular or very large shapes are quoted after on-site templating
- Permit fees are separate and vary by municipality – we’ll tell you what to expect before you commit
- Seniors and veterans save 10% permanently, no expiration
- Repairs over $200 save an additional $40 – ask when you call
Why Mangonia Park Homeowners Choose Winslow
Mangonia Park is a small, tight-knit community, and word gets around when a contractor does good work – or doesn’t. Ed Winslow’s name is on the business, on every permit we pull, and on every invoice we write. That’s not a marketing line; it’s a legal and professional fact. When something goes sideways on a custom project – a fabricated unit arrives slightly off, a permit inspection flags something – Ed is the person who handles it, not a customer service department in another state.
We’ve been doing this work in the Palm Beach area since 2011. We know that the older concrete block homes in Mangonia Park often have window openings that aren’t perfectly square, and that a shaped window template done in a hurry is going to produce a frame that gaps at the corners. We know the Palm Beach County building department’s inspection requirements for Custom Impact Windows. And we know that a shaped window installed without proper flashing in this climate will be leaking within two wet seasons.
Our authorized brands include CWS and ES Windows, both of which produce custom geometric profiles in configurations that carry the NOA (Notice of Acceptance) required under Florida’s building code. ECO Window Systems is another option for certain shapes and glass packages. We order what fits the job, not what’s easiest for us to stock.
The home page has a broader look at everything Winslow covers – windows, doors, and roofing – if you’re thinking about a bigger project alongside your shaped window replacement.
Ed’s name is on the door, and on every job we do. That’s not something a national chain can say.
FAQs – Geometric & Shaped Windows in Mangonia Park
Can geometric and shaped windows be made in impact-rated glass?
Yes – most geometric shapes, including circles, Arched & Curved Windows, octagons, and trapezoids, can be fabricated in impact-rated laminated glass that meets Palm Beach County’s Miami-Dade NOA requirements. The key is ordering through a manufacturer that produces custom geometric profiles in impact configurations – not all fabricators do. We work with CWS and ES Windows specifically because they offer this. If you’ve been told your shaped window can’t be done in impact glass, call us at (561) 928-0302 for a free second opinion before you make any decisions.
How long does it take to get a custom geometric window in Mangonia Park?
Lead times for custom geometric windows typically run 3 to 8 weeks from order confirmation, depending on the shape’s complexity, glass package, and the manufacturer’s current production schedule. Simpler shapes like half-rounds and standard arches tend to come in faster than irregular polygons or Oversized Openings. We’ll give you an honest estimated lead time before you sign anything – not a number we pull out of the air to close the sale. Call (561) 928-0302 and we can give you a current production estimate based on the specific shape you need.
Do I need a permit to replace a shaped window in Mangonia Park?
A permit is required in Palm Beach County when you’re replacing a window with a different size, adding a new window opening, or installing impact-rated glass where there was none before. Same-size replacements in existing openings may qualify for a simplified permit process, but this depends on the scope of work. Winslow handles permit applications, coordinates inspections, and manages all the documentation – you don’t need to deal with the county building department directly. We’ll tell you what’s required for your specific project before any work starts.
What’s the Done Right Promise, and does it apply to geometric windows?
The Done Right Promise is Winslow’s accountability standard: if a job we completed isn’t right, we come back and make it right. It applies to every job we do, including custom geometric and shaped windows. The name refers to 100 years – a long-form way of saying this isn’t a warranty we’ll wiggle out of when the paperwork gets inconvenient. Ed Winslow stands behind it personally. For shaped windows specifically, if the fit isn’t exact, the seal fails, or the flashing was done incorrectly, we own the fix.
Written by Ed Winslow, Owner at Winslow Windows & Doors, serving Mangonia Park since 2011.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.